Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 781
PRESERVE_ICE_CHANNEL_IN_
CASE_OF_LOCAL_MODE
When set to NO (default), local the ICE channel is closed after applying
CAC bandwidth management when Call Admission Control is enabled
in the local network.
When set to YES, the ICE channel is preserved open throughout the
call.
Default: NO
PRESERVE_PARTY_CELL_ON_
FORCE_LAYOUT
Used to prevent reassignment of cells in a forced layout that were
assigned to endpoints that have disconnected, paused their video, or
have been removed from the conference. The cell will remain black
until the endpoint reconnects or a new layout is used, or the
conference ends.
Range: YES / NO
Default: NO
• NO - Cells of dropped endpoints are reassigned. Endpoints that
reconnect will be treated as new endpoints.
• YES - Cells of dropped endpoints are not reassigned, but will be
reserved until the endpoint reconnects.
For information see the Polycom RealPresence Collaboration Server
(RMX) 1500/1800/2000/4000 Getting Started Guide, Force Layout and
Preserve Participant Call.
PSTN_RINGING_DURATION_SE
CONDS
If there is a slow response from the ISDN switch, the PSTN dial-out
ringing duration (in seconds) is used by the Collaboration Server to
disconnect the call.
Default: 45
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is the is the
selected method for packet priority encoding.
Default: 0x31
QOS_MANAGEMENT_NETWOR
K
Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
REDUCE_CAPS_FOR_REDCOM
_SIP
To accommodate deployments where some devices have limits on the
size of the SDP payload in SIP messages (such as LSCs from Redcom
running older software versions), when the flag value = YES, the SDP
size is less than 2kb and includes only one audio and one video media
line.
Default: NO
REDIAL_INTERVAL_IN_SECON
DS
Enter the number of seconds that the Collaboration Server should wait
before successive re dialing attempts.
Range: 0-30 (Default: 10)
Manually Added, Modified, Deleted System Flags
Flag Description