Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 788
SUPPORT_HIGH
_PROFILE_WITH_ISDN
Enables or disables the support of High Profile video protocol for ISDN
participants in CP conferences. This flag is specific to CP conferences
and has no effect on VSW conferences.
Range: YES / NO
Default: NO
TC_BURST_SIZE This flag regulates the Traffic Control buffer or maxburst size as a
percentage of the participant line rate.
Range: 1-30.
TC_LATENCY_SIZE This flag limits the latency (in milliseconds) or the number of bytes that
can be present in a queue.
Range: 1-1000 (in milliseconds).
TCP_RETRANSMISSION_TIME
OUT
The number of seconds the server will wait for a TCP client to answer a
call before closing the connection.
Default = 5 (seconds)
V35_MULTIPLE_SERVICES Not Supported in RMX 1800.
If the connection of multiple Serial Gateways to RTM-LAN cards is
required:
The V35_MULTIPLE_SERVICES System Flag must be set to YES.
The default value of the V35_MULTIPLE_SERVICES System Flag is
NO, enabling only one Serial Gateway to be supported per RTM-LAN
card.
V35_ULTRA_SECURED_SUPPO
RT
This flag must be set to YES when deploying a Serial Gateway S4GW
in Ultra Secure Mode..
VSW_CIF_HP_THRESHOLD_BI
TRATE
Controls the Minimum Threshold Line Rate (kbps) for CIF resolution for
High Profile-enabled VSW conferences.
Default: 64
VSW_HD1080p_HP_THRESHOL
D_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD1080p
resolution for High Profile-enabled VSW conferences.
Default: 1024
VSW_HD720p30_HP_THRESHO
LD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD720p30
resolution for High Profile-enabled VSW conferences.
Default: 512
VSW_HD720p50-60_HP_THRES
HOLD_BITRATE
Controls the Minimum Threshold Line Rate (kbps) for HD720p50 and
HD720p50 resolutions for High Profile-enabled VSW conferences.
Default: 832
Manually Added, Modified, Deleted System Flags
Flag Description