Filter
Top Products
105
105
ENGLISH
Troubleshooting
105
✤ Before contacting a Samsung authorized service center, perform the
following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display
Moisture Condensation
✤ If the camcorder is brought directly from a cold place to a warm
place, moisture may condense inside the camcorder,
on the surface of the tape, or on the lens. In this condition, the tape
may stick to the head drum and be damaged or the unit may not
operate correctly.
To prevent possible damage under these circumstances, the
camcorder is fitted with a moisture sensor.
✤ If there is moisture inside the camcorder, (DEW) is displayed.
If this happens, none of the functions except cassette ejection will
work.
Open the cassette compartment and remove the battery.
Leave the camcorder for at least two hours in a dry warm room.
slow
slow
no
slow
slow
slow
slow
the battery pack is almost
discharged.
When the remaining time on the
tape is about 2 minutes.
the tape reached its end.
there is no tape in camcorder.
the tape is record protected.
the camcorder has some mechanical
fault.
moisture condensation has formed
in the camcorder.
Change to a charged one.
Prepare a new one.
Change to a new one.
Insert a tape.
If you want to record,
release the protection.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* If unresolved contact your
local service representative.
see below.
TAPE END!
TAPE END!
TAPE!
PROTECTION!
....
D
L
C
R
Display Blinking Informs that... Action
Troubleshooting
✤
✤
✤ DEW
1.
2.
3.
4.
*
TAPE END!
TAPE END!
TAPE!
PROTECTION!
....D
L
C
R