Filter
Top Products
✤
✤
✤
✤
1.
■
■
-
-
-
2.
3.
4.
■
■
5.
■
■
■
■
■
Advanced Recording
6666
ENGLISH
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP
mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone, connect the
microphone to the external MIC input jack on the
camcorder.
■
When you wish to dub using the External A/V input,
connect the Multi-AV cable to the camcorder by inserting
the Multi-AV cable into the Multi-AV Jack at the front
side of the camcorder.
- Press the MENU button, move the MENU
SELECTOR to highlight A/V and push the MENU
SELECTOR.
- Move the MENU SELECTOR to highlight AV
IN/OUT and push the MENU SELECTOR to select
AV IN/OUT.
- Move the MENU SELECTOR to highlight AV IN
(or S-VIDEO IN) and push the MENU SELECTOR
to select AV IN (or S-VIDEO IN).
2. Press the (PLAY/STILL) button and find the
timeframe of the scene to be dubbed.
3. Press the (PLAY/STILL) button to pause the
scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state for
dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
■
Press the (STOP) button to stop the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write protected video
tape.
■
When you wish to dub using the External A/V input, you must connect the Multi-AV
cable to the audio system from which you wish to record.
■
When adding sound using the built-in microphone, make sure not to connect any
cables to the camcorder.
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
AV IN
Audio (R)
Audio (L)