1.
2.
3.
■
4.
■
5.
6.
■
7.
■
■
IEEE 1394
IEEE 1394 Data Transfer
7777
ENGLISH
Recording with a DV connection cable
1. Set the mode switch to TAPE.
2. Set the power switch to PLAYER mode.
3. Connect the DV cable (not supplied) from the DV
IN/OUT port of the camcorder to the
DV IN/OUT port of the other DV device.
■
Make sure that DV appears on the screen.
4. Press the START/STOP button to begin REC PAUSE
mode.
■
PAUSE is displayed on the OSD.
5. Start playback on the other DV device while you
monitor the picture.
6. Press the START/STOP button to start
recording.
■
If you want to pause recording
momentarily, press the
START/STOP button again.
7. To stop recording, press the
(STOP) button.
Notes
■
When using this camcorder as a recorder, the pictures that appear on a
monitor may seem uneven, however recorded pictures will not be
affected.
■
Operation is not guaranteed for all the recommended computer
environments mentioned above.