Filter
Top Products
SPEED DOME CAMERA User’s Manual
57
ENGLISH
SPEED DOME CAMERA User’s Manual
56
Alarm Enable : It can be determined whether to enable the alarm setting.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Alarm Setting
Alarm Enable ON
Alarm Input
Alarm Output
MD Dwell Time ON 30 SEC
Alarm Input : Alarm Input Mode/Priority/Method is set up.
Alarm Input
IN 1 OFF 1 OFF
IN 2 OFF 2 OFF
IN 3 OFF 3 OFF
IN 4 OFF 4 OFF
Alarm Setting
Alarm Enable ON
Alarm Input
Alarm Output
MD Dwell Time ON 30 SEC
ON/OFF : Alarm is enabled in ON mode.
NC/NO/OFF : NC/NO/OFF can be selected depending on the alarm sensor.
1 - 4 (Priority) : Priority for the 4 alarm inputs is set up. Response comes first from
the alarm input of higher priority.
Preset/Group/Tour Number :
Whether to enable the operation of Preset/Group/Tour by alarm input can be set
up. When the alarm is input, it stays in the Preset/Group/Tour position for the
Dwell Time set up by the Preset/Group/Tour Number of each alarm. The alarm in
pattern is operated according to the pattern setting.
Alarm Out : One of the 2 Alarm Outs corresponds to each Alarm input.
Alarm Output
Setting 1 1 2 3 4 MD
Setting 2
1 2 3 4 MD
Timer 1 OFF
Timer 2 OFF
OUT Off 1
OUT Off 2
Alarm Setting
OUT1 SET/OUT2 SET : One of the 4 Alarm Inputs corresponds to the 2 Alarm
Outputs.
OUT1 TIME/OUT2 TIME : For the 2 Alarm Outputs, On/Off and the operation time
can be set up in the units of second/minute/hour. (1-59
sec, 1-59 min, 1-59 hour)
OUT1 OFF/OUT2 OFF : If you want to cancel the operating Alarm outputs at
once, select the corresponding menu to cancel the
operating Alarm.
ON/OFF : It can be set up how long the operation will be kept when the
motion is detected. (1-59 sec, 1-59 min)
Alarm Enable ON
Alarm Input
Alarm Output
MD Dwell Time ON 30 SEC
MD Dwell Time : When the Motion Detection function is on, the motion of
intruders can be detected. When the motion is detected, the
Alarm signal is displayed in the Alarm Output Terminal. For
detailed settings of the Motion Detection for each Preset menu,
see page 43 and 44.
Alarm Setting
Alarm Enable ON
Alarm Input
Alarm Output
MD Dwell Time OFF
Alarm Setting
Alarm Enable ON
Alarm Input
Alarm Output
MD Dwell Time ON 30 SEC
5) Alarm Setting
Functional Description