Samsung VP-D190MSI Camcorder Accessories User Manual


 
ENGLISH
72
IEEE 1394 Data Transfer
System requirements
CPU : faster Intel
®
Pentium III
TM
450Mhz compatible.
Operating system : Windows
®
98SE, ME, XP, Mac OS
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable (VP-D190MSi only)
1. Set the power switch to VCR mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
Make sure that DV IN appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the (STOP) button.
Note
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.