Sanyo LNS-T02 Camera Lens User Manual


 
4
INSTALL THE LIGHT-BLOCK SHEET.
Fig-6
LIGHT-BLOCK SHEET
(See figure-6)
Install the light-block sheet around the lens
as shown in the illustration.
(Use the sheet included with the lens.)
MOUNT THE LENS COVER. (See figure-7)
5
When in install the both upper and lower lens
covers, put the light-block sheet through the
lens and install the sheet so that it should be
placed in the guide slot of the lens cover. (See
figure-8) If the installation of the light-block
sheet is incorrect, there will be the space
between lens and the lens cover, so that it will
be the cause of leakage of light or the dust
entering at the main cabinet.
1.Insert the upper part lens cover and fix them
with screws A (4 screws).
Fig-7
UPPER LENS COVER
LOWER LENS COVER
A
A
B
LIGHT-BLOCK SHEET
Insert into the slot.
Set the light-block sheet,
so that the large rounder
side is set over the lens.
Fig-8
Removed lens cover in figure-2 is not
used, keep the cover for possible re-
use when current lens is used.
2.Insert the lower part lens cover and fix them
with screws B (2 screws).