Sanyo VPC-HD2000GX Digital Camera User Manual


 
English 100
NORMAL/SHOOTING
Still image setting
For still images, you can select either the 4:3 or 16:9 horizontal to vertical
aspect ratio. This menu is also used for shooting sequential shots.
Sequential shots
1 Select R or c, and press the SET button.
h The camera changes to the sequential shots mode.
2 Press the [] button.
h Shooting begins. Shooting continues as long as the [ ] button is
kept pressed.
HINT
What is the maximum number of images in a sequential shots
sequence?
R: 9 images (6 fps)
c: 15 images (12 fps)
iIf you continue shooting even after the maximum number of images has
been captured, recording does not stop.
iIf you continue shooting after the maximum number of images has been
captured, subsequent captured images will overwrite the sequence
already captured, beginning from the first image in the sequence.
About the focus when shooting sequential shots
iWhen sequential shots are captured, the autofocus operates when the
[ ] button is pressed halfway, fixing the focus.
Can the flash be used?
iThe flash does not operate when shooting sequential shots.
Did the angle of view change?
iWhen shooting sequential shots, the angle of view relative to that of still
image shooting may change.
iAt the c setting, the images are captured with an enlarged angle of view
in comparison to other recording modes.
About the PHOTO NR (page 138) setting
iDuring sequential shots shooting, the PHOTO NR setting automatically
turns OFF.