Sanyo VPC-WH1 Camcorder User Manual


 
69 English
MACRO-PHOTOGRAPHY (ZOOM)
Your camera has two zoom functions: optical zoom and digital zoom.
1 Point the camera lens at the
subject.
2 Push the zoom switch toward
[T/]] or [W/P] to compose
the desired image.
[T/]]: Zoom in on the subject.
[W/P]:Zoom out.
h When the zoom switch is
pushed, the zoom bar appears
on the monitor.
h When moving the optical
zoom, push the zoom switch
lightly to zoom slowly, and
press more strongly to zoom
quickly.
h When the optical zoom factor
is at maximum, zooming stops
temporarily. When the zoom
switch is pushed toward the
[T/]] side again, the mode
changes to the digital zoom
mode and zooming continues
(NORMAL mode).
3 Take the picture.
For video clip recording, see page 62.
For shooting single shots, see page 63.
For shooting sequential shots, see page 85.
HINT
When recording video clips at a high magnification
i
When recording video clips at a high magnification, a moving subject or moving camera
can cause camera shake, resulting in a distorted playback image. This phenomenon is
due to the characteristics of the CMOS sensor and is not a malfunction.
i
It is recommended that you use a tripod to stabilize the camera when recording video
clips at a high magnification.
Zoom switch
[W/P]
Zoom bar
Monitor
When both
optical and digital
zoom are enabled
Digital zoom (yellow)
Optical zoom
When optical
zoom only is
enabled
Pointer
[T/]]