Filter
Top Products
Technical Specifications:
SECO-LARM offers both Black & White and Color
Dome Cameras for use in those applications which
require an attractive, inconspicuous look.
SECO-LARM dome cameras offer high resolution
with low lux in a compact and durable enclosure.
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
BasicDomeCamsb.cdr
®
Model
EV-1223C12
EV-122C-2
EV-122B-4
4.3mm
2.9mm
4.3mm
78°
120°
78°
Lens
Angle
Viewing angles are approximate
Type
Chip
Resolution
Pickup elements
Scanning system
Sync
Video output
Lens
Viewing Angle*
Minimum illumination
Gamma correction
S/N ratio
Shutter control
Backlight compensation
Gain control
White Balance
D/A Bits
Power source
Power consumption
Operating temperature
Dimensions
420 TV lines
512 x 492 pixels (NTSC / EIA)
2:1 interlace
Internal
1V pp composite output, 75 ohms
EV-1223C12 / EV-122B-4 (4.3mm)
EV-122C-2 (2.9mm)
EV-1223C12 / EV-122B-4 (78 )
EV-122C-2 (120 )
0.1 lux
0.45
>48dB (AGC off)
Auto Electronic Shutter (AES)
1/60~1/100,000 sec. (NTSC / EIA)
Auto & Manual
Auto
10
12VDC
14°~140° F (-10°~60° C)
1
1
3 /2” x 2 /4” (88 x 57 mm)
°
°
Color Cameras B/W Camera
IP67
Weatherproof
12
VDC
IR
Sony
CCD
Low
Current
Drain
0
Lux
Day
Night
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
Dome Cameras
With Multi-Axis Gimbal Brackets*
Type
Color
Color
B/W
1/3” CCD, Sony
1/3” CCD, A1 PROs
AWB N/A
110mA 100mA
For wall mounting. Remove the 2 screws and turn the
o
lens 90 clockwise until the wire harness is adjacent to the
support bracket, then replace the 2 screws to secure it.
*For ceiling or wall mounting
Wire
Harness
Support
Bracket
Screw
Support
Bracket
Support
Bracket
Wire
Harness
Screw
Lens