Filter
Top Products
7979E-1
U 9000
Operating Instructions
Congratulations on the purchase of a SLIK U 9000 Tripod.
The SLIK Corporation has designed your tripod to be a sturdy,
rugged, dependable product that will provide you with many years of
satisfactory use.
Please take a few moments to read this instruction sheet carefully so
you can take full advantage of your Tripod's many fine features.
Retain this instruction sheet in case you might want to refer back to it.
Caution
This caution icon refers to information pertaining to important safety
procedures in preventing injuries, and damages which may occur as
a result of mishandling this product.
Prohibited
This prohibited icon refers to information pertaining to prohibited con-
tents. Please refer to instructions closely to avoid accidents.
Specification
Length folded 590mm
(23 1/4")
Max. operating height 1,500mm
(59 1/12")
Max. center column ext.
300mm
(11 5/6")
Weight 1.6kg
(3 lbs 8 oz)
R
Quick Release Platform
Pan & Tilt Handle
Retractable
Camera Positioning Pin
Camera Post
Quick Release
Platform
Panning Lock Knob
Quick Release
Lock Lever
Vertical Tilt Knob
This product has been designed
to handle equipment weighing
under 2 kgs (4 lbs 6 oz).
Do not overload.
Some equipment weighing under
2 kgs (4 lbs 6 oz), such as long
lenses, may not balance well due
to its weight distribution. In such
case, please use a larger tripod.
Equipment that can be
used with this Tripod
Carrying the Tripod
Carrying a tripod with a camera
left on can result in unexpected
accidents.
We therefore, recommend you to
remove your camera while carrying
the tripod.
Prohibited
Attaching Camera to the Quick Release Platform
To remove the Quick Release
Platform from the Pan Head, turn
Quick Release Lock Lever
counterclockwise, and lift Platform
out at an angle from the side
closest to the lever.
The Retractable Camera Positioning
Pin enables you to mount either a
video, or a still camera on to the
Quick Release Platform.
For still cameras, align the length of
the Platform along the baseplate of
the camera body, and tighten screw
into the tripod socket with a coin.
For video cameras, match the
Camera Positioning Pin of the
Platform to the corresponding hole
beneath the camera, and then tighten
screw into tripod socket with a coin.
Replacement Quick Release
Platform for the U 8000 is available.
Cat. No. 618-731
Return Quick Release Platform
back onto the Pan Head by
inserting at an angle from the side
closest to the Quick Release Lock
Lever.
Center Column
Pan Head
Leg Lock
Elevation
Crank Handle
Two way Rubber or
Spike Leg Tip
Leg Brace
Center Column
Locking Collar
Center Column
Cover
Center Column
Ring
Leg Lock Lever
Components
Built in Level
Caution
Prohibited