Sony 370PK2 Camera Accessories User Manual


 
110 Chapter 4 Viewfinder Screen Indications and Menus
Chapter 4 Viewfinder Screen Indications and Menus
Setup Files
Changing File Settings
When using advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P), you can change the settings
about picture quality in setup files. (In basic menu
page 1, a part of items are changeable.)
The changes are accepted only until another file is
called up, after which the original settings are restored.
If you save the changes, store the modified file as one
of the user files or record it in a cassette. (See the
following section Saving File Settings.)
1 Perform the steps described in To call up files
recorded onto a tape on page 109 to call up the
selected file.
2 Access advanced menu page 11 or 12 (page 10 or
11 on the DSR-370/370P).
(The following figure shows an example for the
DSR-570WS/570WSP.)
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
3 Make the desired changes.
Page 11 (page 10 on DSR-370/370P)
Currently
selected file
a)
Currently
selected file
a)
Item
Settings
M.BLACK, STRETCH and
DTL LEV
See Basic menu page 1
(page 92).
M.GAMMA
Adjusts the gamma curve.
99 to ±0 (normal value) to
+99
V DTL LEV
Adjusts the vertical detail.
99 to ±0 (normal value) to
+99
DTL FREQ
Adjusts the central frequency
of the detail.
LL, L, M (normal value), H,
HH
Page 12 (page 11 on DSR-370/370P)
Saving File Settings
Files whose settings have been changed for certain
shooting conditions can be saved as a user file or onto
a tape.
For details, see To save setup files to a tape (page 111).
1 Set the SETUP switch to FILE.
2 Call up a setup file whose settings approximate the
desired shooting conditions and then change some
of the settings.
For details of this operation, see Calling up a Setup
File (page 108), Changing File Settings above,
Viewfinder Basic Menu (pages 92 to 97), and
Viewfinder Advanced Menu (pages 98 to 106).
Item Settings
SAT
Adjusts the saturation of the
image.
99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
HUE
Adjusts the hue of the
image.
99 to ±0 (normal value) to
+99
SKIN SAT
Adjusts the saturation in the
specified area of the image.
99 to ±0 (normal value) to
+99
Negative adjustment values
decrease the saturation and
positive adjustment values
increase the saturation.
SKIN HUE
Adjusts the hue in the
specified area of the image.
99 to ±0 (normal value) to
+99
SETUP switch