Filter
Top Products
128
Chapter 5 Settings
Caution
The VMD (Camera) setting cannot be configured when the mount angle is
set to 90 or 270 degrees.
Area1 to Area2
Select the check boxes of the detection areas to enable.
Sensitivity
Set a value from 1 to 9 as the sensitivity level.
Normally, you do not need to configure this setting.
x For the SNC-RX550, Generic Camera, and similar cameras
You can set up to four motion detection or object detection areas. The name
of the area being configured is displayed in blue. Drag the red frame with
your mouse to configure a motion detection area. By dragging each edge of
the detection area, you can change its size.
Detection areas cannot be deleted.
Caution
The VMD (Camera) setting cannot be configured when the mount angle is
set to 90 or 270 degrees.