Filter
Top Products
138
Chapter 5 Settings
Normal Recording
Select this check box for normal recording and then configure the
following settings.
Note
When normal recording and alarm recording times overlap, if the
resolution is set to 360 × 288 dpi for normal recording and 720 × 576 dpi
for alarm recording, the resolution of images imported from the camera
becomes 720 × 576 dpi. Normally, images imported from cameras use
the maximum frame rate and resolution values for all actions during
operation.
[Frame/second], [Resolution], [Quality], and [Color
Level]
Configure the image quality settings to send to the camera at the
schedule start time.
Caution
Because the available frame rates differ depending on the camera
and codec, click [V] next to [Frames/second], and select a frame
rate available for the camera from the list that appears. Make sure
to confirm operation before operating NSR. For Generic Camera,
a list of available frame rate and resolution settings for the camera
will be shown.
Alarm Recording
Select this check box for alarm recording and then configure the
following settings.
Caution
If the camera properties for alarm recording or normal recording are
different from the camera properties for monitoring, the camera image
stops updating for several seconds when recording starts and stops. Make
sure to confirm your settings before operating NSR.
[Frame/second], [Resolution], [Quality], and [Color
Level]
Configure the image quality settings to send to the camera at the
schedule start time.
Caution
Because the available frame rates differ depending on the camera,
click [V] next to [Frames/second], and select a frame rate
available for the camera from the list that appears. Make sure to
confirm operation before operating NSR. For Generic Camera, a
list of available frame rate and resolution settings for the camera
will be shown.
Pre Alarm
If upon occurrence of an alarm, you want to go back and record
the images prior to the alarm, configure the following settings.
Frame/second
Specify the frame rate (fps) for recording pre-alarm images.