Sony 3-869-888-16 (1) Security Camera User Manual


 
14
Chapter 1 Introduction
System Requirements
The hardware required in order to use this recorder are as follows.
Sony network cameras
Contact your dealer for details about compatible Sony network cameras.
Monitor
1)
USB keyboard
2)
USB mouse
3)
Network switch
1000Base-T/100Base-TX/10Base-T cable
CF (CompactFlash) card or USB memory device
4)
1) For details about monitors supported by the NSR, contact your retailer.
The following “Generic” type monitors can be selected.
Frequency is indicated at the end of each line.
- Generic LCD Display; LCD Panel 1024×768; 40-70
- Generic LCD Display; LCD Panel 1280×1024; 50-75
- Generic LCD Display; LCD Panel 1600×1200; 60
- Generic CRT Display; Monitor 1024×768; 50-70
- Generic CRT Display; Monitor 1280×1024; 50-90
- Generic CRT Display; Monitor 1600×1200; 50-90
The following resolutions can be specified.
- XGA (1024×768)
- SXGA (1280×1024)
- UXGA (1600×1200)
2) Use a USB keyboard with a cable. However, keys other than the standard may not
function. Wireless or infrared USB keyboards may also not function properly.
3) Use a USB mouse with a cable. However, three-button or wheel mice may not
function properly. Wireless or infrared USB mice may also not function properly.
4) Required when backing up system information such as logs.
- For CF, use a card that has been formatted in advance with VFAT.
- For USB memory, use a device that supports general USB Mass Storage Class
specifications.
- CF cards are not compatible with the NSR-25.