Filter
Top Products
179
Miscellaneous
• When using external media, do not insert a CF (CompactFlash) card and USB
memory device at the same time.
• When exporting recorded image or log files, an export in progress is cancelled
if you click [Abort] in the Status dialog box. A warning message to confirm
cancellation does not appear. The export will be cancelled once copying of the
file that was to be exported completes.
• The NSR supports the following external media formats.
- CF (CompactFlash) (only NSR-100/50)
- USB memory
- CD-R/RW
- DVD-R (only NSR-100/50)
- DVD+R (only NSR-100/50)
Caution
• Depending on the external media, it may not be supported.
• Errors may occur when writing onto CD/DVD media.
If an error occurs, do not eject the CD/DVD, and try writing onto it again.
• Do not write on media that has been previously written on.
If an error occurs while writing for the second time, previously written data
may become unreadable.
• DL (Dual Layer) DVDs are not supported.
• When multiple files are written onto a CD/DVD with the NSR, only a
portion of the files may be readable, depending on the CD/DVD drive or OS
(Operating System). (Confirm multi session and multi border support.)
System Menu
• Second monitors continue to display images while you use the Setup Menu
and during shutdown and reboot procedures.
• When a route setting for a port that does not have a network cable connected
to it is configured during network configuration in the Setup Menu, an error
message indicating that the network is unreachable appears. Connect the
network cable before configuring the settings.
• When creating host and server names for the NSR with the Setup Wizard or
Setup Menu, use only alphanumeric characters, underscores (_), and hyphens
(-).
Remote Control Operations
• You can operate the export function from a remote control unit, but the
operation may be difficult without the aid of a mouse.
• If you use the mouse or F1 key on the remote control unit to switch the Option
window to a mode other than Camera Control in the middle of performing pan
and tilt operations with the remote control unit, the camera may continue to
pan and tilt on its own. Reset the Option window to Camera Control and
operate the joystick to regain control of the camera.
• When you press the SHIFT button on the remote control unit, the SHIFT
LOCK LED lights blue, and the Shift Lock function is enabled. Be aware that
the functions printed below each button are active in this state. (This does not
include the numeric keys and the CANCEL, ENTER, and CAMERA
SELECT buttons.)
• You cannot move columns in lists such as those displayed in the Option
window with the remote control unit. Use a mouse to select and sort columns.
• When the NSR is experiencing a high processing load, some remote control
operations may not register immediately. These operations may later execute
all at once.
• When a monitor window with no camera assigned to it (“No Camera” status
displayed) is selected in a multiple window layout, pressing the [1×1] button