Filter
Top Products
57
Chapter 4 Monitoring Live Images
Monitoring Window (Monitor 2)
When two monitors are connected to the NSR, a monitor layout specified as
1×1, 2×2, or 3×3 is displayed on the monitor connected to monitor connector 2.
You can use monitor 2 as a hot spot monitor.
The image displayed is the same as that of the monitor window selected in
monitor 1. However, if there is a sensor input or motion detection, the image
from the corresponding camera is displayed.
When two monitors are connected, the NSR operates as follows:
• Selected images, or images from cameras with a sensor input or motion
detection event, are displayed in available monitor windows sequentially,
from top left to top right, and then bottom left to bottom right.
• Images that are already displayed in a monitor window do not appear again in
a different monitor window.
Notes
• You cannot control a camera for a monitor window directory from monitor 2.
• You cannot perform configuration operations from monitor 2.
• When images are displayed on monitor 2, the performance of monitor 1 may
decrease.
Monitor Window
A Camera name
Indicates the name of the camera.
Screen of Monitor 1 Screen of Monitor 2
12 3
4
5
76