Filter
Top Products
90
Chapter 5 Settings
To change storage settings
1
Select the storage location you wish to configure under Storage in the tree
on the left side of the window.
2
Configure all the settings.
Name
Enter the storage location name.
Default, Alarm, Normal, and Manual have been provided as storage
locations. The name of Default cannot be modified.
Enable
Select this check box if you want to use this storage location as the save
destination.
Cleanup
Enable this function if you want to delete all recorded images that are older
than the specified number of days to store recorded images when the
remaining capacity of the storage location becomes lower than a specified
amount.
Run cleanup job when
Select this check box to enable the function.
Remaining capacity is lower than
Enter the limit for the minimum remaining capacity. Specify % or
MB.
Cleanup files saved more than
Enter the number of days to store recorded images from a range of 1
to 366. Recorded images are not deleted until the specified number
of days has elapsed since recording.
Data Overwriting
Enable this function if you want to keep a certain amount of storage space
available by having the files in the oldest record automatically deleted when
the remaining capacity of the storage device becomes lower than a specified
amount.