Filter
Top Products
112
Storing the Camera Settings
Chapter 5 VISCA Camera Operations
• The camera settings of position numbers 1 to 16 (1 to 6 for the BRC-300/
300P camera) are stored in memory of the camera. The settings that can
be stored differ depending on the functions of the cameras. For details,
refer to the Operating Instructions of the camera.
• The camera settings of position numbers 17 to 99 (7 to 99 for the BRC-
300/300P camera) are stored in memory of the switcher. The settings that
can be stored are panning/tilting, zooming, focus mode, focus position,
exposure and white balance.
6
Hold the PRESET button pressed.
The indication “2002 Completed.” appears on the display panel when
storing is complete.
To recall the preset camera setting
1
Check that the CAM mode button is lit.
If the CAM mode button is not lit, press to light up the CAM mode button
so that the switcher is set to CAM mode.
2
Press one of the the CAMERA 1 to 7 buttons to select the camera whose
settings you wish to recall.
The selected button lights in orange, and the display panel displays the
setting information of the selected camera.
3
Check that the DIRECT RECALL button is not lit.
If the button is lit, press the DIRECT RECALL button to make it go dark.
4
Press numeric buttons 0 to 9 to enter the camera position number (0 to 99)
of the camera in which the settings you wish to recall have been stored.
The camera position number you entered flashes next to “POS:” at the lower
left of the display panel.
To change the number you entered, press the CLEAR button then enter a
new number.
5
Press the RECALL button.
The settings such as pan/tilt, zoom, focus and exposure, stored in the entered
camera position number, are recalled.
• For the settings stored in position numbers 1 to 9, you can recall them directly
by pressing to light up the DIRECT RECALL button and pressing numeric
button 1 to 9 (Direct Recall function). Using this function allows you to recall
the stored settings with only one press when you wish to change the camera
settings immediately.
• If you recall the settings in position numbers 17 to 99 (7 to 99 for the BRC-
300/300P camera), panning/tilting, zooming, focus mode, focus position,
exposure and white balance settings are reflected to the camera.
Notes
Note
Notes