Sony BRS-200 Camera Accessories User Manual


 
25
Control Panel
Chapter 2 Locations and Functions of Parts
ZOOM control
You can change the zoom speed when you operate the
zoom by using the dial on the upper part of the joystick.
Press the control to switch between “CONSTANT” and
“VARIABLE.” Turn the control to select the speed from
among 1/8 to 8/8.
PAN/TILT (panning/tilting) control
You can change the panning and tilting speed when you
operate panning/tilting by using the joystick.
Press the control to switch between “CONSTANT” and
“VARIABLE.” Turn the control to select the speed from
among 1/24 to 24/24.
You can select the speed from among 0.5/24 to 24/24 for
the BRC-Z700 camera.
c EXIT button
When menu mode is selected, press this button to return to
the next higher layer of the menu. The last digit of menu
page changes to “0” and flashes. You can enter the last
digit of that number using numeric buttons 0 to 9.
When you press this button while the last digit of the menu
page is flashing or the last digit is “0,” the last two digits
reset to “00.”
When “TOP” is shown at the lower left of the display
panel, the top menu is displayed. In this case, pressing the
EXIT button does not change the display.
d PAGE button
The number of pages for the displayed menu and the
individual menu page number are displayed at the right
end of the display panel. The number of pages indicates
how many pages in the same layer the displayed menu has.
When you press the PAGE button, the display changes to
the next menu page. When the button is pressed while the
last page is displayed, the first page is restored.
Note
Note