Filter
Top Products
46
Menu Operation
Chapter 3 Preparations
Menu Operation
You can set up your system, select various effects for switching operation, etc.
while viewing the menus displayed on the display panel.
Three-digit menu page numbers are assigned to all the setting menus
individually. You can display the desired setting menu directly by specifying the
menu page with the numeric buttons. You can also use the adjustment controls
located below the display panel to display the setting menus or to change the
setting values.
Displaying the Menus
You can display a menu by specifying its assigned three-digit menu page.
This section describes the procedure for setting “FORMAT” in “SYS MODE”
(system mode), as an example. Menu page assigned to “SYS MODE” is 951.
For other menu page numbers, see “Menu List” on page 131.
1
Press the MENU button.
The MENU button lights in orange, and the indication on the display panel
switches to menu mode.
2
Press numeric button 9 then . (dot), 5 and 1 in sequence.
The SYS MODE menu is displayed.
7
DSK PIP SETUP
MEM
MENU/SNAP
SHOT/CAMERA POSITION
WIPE MATT
89
MENU
456
DIRECT
RECALL
123
PRESET
0.
NEAR FAR
EXIT
PAG E
CLEAR RECALL
FOCUS BRIGHT ZOOM PAN/TILT
F1 F2 F3 F4
SIG:CAM1
POS:
FOCUS
AUTO
VARIABLE
6/8
CONSTANT
24/24
AUTO
-----
MENU button
Numeric buttons, . (dot) button
Display panel
SYSTEM
SYS MODE
FORMAT
SD
FRAME
59.94
ASPECT
16:9
1/5
951
APPLY
Exec
Setting menu
Submenu Menu page
Setting items