Filter
Top Products
47
Menu Operation
Chapter 3 Preparations
To specify a three-digit menu page, press the numeric button for the third digit
of the number, the . (dot) button then the second and first digits in sequence.
To display other menu pages
Use the PAGE and EXIT buttons below the display panel or the numeric buttons
and . (dot) button.
Each digit of the menu page indicates the layer of the menu. The third digit
indicates the first layer, the second digit the second layer, and the first digit the
third layer. If the menu has no third layer, the first digit of the menu page is
shown as “0.” The menu display can be switched to another menu by specifying
a three-digit number, or to another setting menu of the same submenu by
changing only the first digit.
• PAGE button: Each time you press this button, the submenu displayed on the
display panel changes within the same setting menu. For the SETUP menu,
the setting items within the same submenu change.
• EXIT button: The display returns to the one upper layer of the menu.
• MENU button: The display returns to the one upper layer of the menu. When
the TOP menu is displayed on the display panel, pressing this button exits
menu mode.
• Numeric and . (dot) buttons: When you specify a three-digit menu page
using these buttons, the specified menu will be displayed, exiting the currently
displayed menu.
To change all three digits
Specify all numbers for the menu page to be displayed.
Press the numeric button for the third digit, .(dot), second digit, then the first
digit in sequence.
Note
NEAR FAR
EXIT
PA GE
FOCUS BRIGHT ZOOM PAN/TILT
F1 F2 F3 F4
SETUP
TOP
CAMERA
SYSTEM
INPUT..
UTILITY
OUTPUT..
STATUS..
1/1
900
PANEL..
REBOOT..
7
DSK PIP SETUP
MEM
MENU/SNAP
SHOT/CAMERA POSITION
WIPE MATT
89
MENU
456
DIRECT
RECALL
123
PRESET
0.
CLEAR RECALL
Numeric buttons, . (dot) button
MENU button
EXIT button
PAGE button
900 t 910 t 911 t 912
...
918
SETUP menu Other setting menus
(Example:
MEM menu)
400 t 410 t 420 t 430 t 440