Sony CA-570P Camera Accessories User Manual


 
13(E)
Attaching the CA-570/570P to a BVP-550/550P Color Video Camera
When you attach the CA-570/570P to a BVP-550/550P Color Video
Camera as shown below, the 68-pin connectors on both units are
automatically connected.
1 Attach the CA-570/570P to the rear of the BVP-550/550P.
Hook the upper part, then push the lower part in until it snaps into
place.
2 Tighten the screw with a coin.
Tighten the screw.
Removing a Camera Adaptor
Loosen the screw on the video camera until it stops, then remove the
camera adaptor while pushing the screw.
Loosen the screw on the video
camera until it stops, then push it.