Sony CA-702P Camcorder Accessories User Manual


 
3(E)
Overview
The CA-702/702P Camera Adaptor attaches to the DNW-7/7P/9/9P/9WS/
9WSP/90/90P/90WS/90WSP Digital Camcorder, DNV-5 Recorder Unit,
or DVW-700/700P/700WS/700WSP Digital Betacam Camcorder to allow
the connection of a portable VTR through a camera cable (BVW-50/50P/
DVW-250/250P).
When attached to a DNW-7/7P/9/9P/9WS/9WSP/90/90P/90WS/90WSP,
the CA-702/702P allows the camcorder to record a video signal
(composite or SDI (serial digital interface)) from an external VTR (Pool
Feed function). The CA-702/702P has the following features:
Pool Feed Function
When attached to a DNW-7/7P/9/9P/9WS/9WSP/90/90P/90WS/90WSP,
the CA-702/702P allows the camcorder to record a video signal
(composite or SDI) from an external VTR.
The CA-702/702P simultaneously outputs an active-through signal from
the VIDEO/SDI OUT connector for recording on other external
camcorders.
VTR START button
The CA-702/702P is provided with a VTR START button that controls
synchronized operations on the camcorder and an attached portable VTR,
or merely controls recording operations on the camcorder when used
alone.
SDI inputs and outputs
The CA-702/702P comes with serial digital video/audio input and output
connectors that allow not only full monitoring of recorded video and audio
signals but also recording on the camcorder itself.
When the SDI/COMPOSITE switch is set to SDI, the VIDEO IN/OUT
connectors support the transmission of SDI signals.
Various power supply capabilities
• Power supplied to the DC IN connector on the CA-702/702P can be used
to power the camcorder.
• Power from the DC OUT connector on the CA-702/702P can be used to
power other equipment such as the WRR-860A UHF Synthesized
Diversity Tuner.