Filter
Top Products
4
Flexible Intercom System
The CCU-TX7P is equipped with a
programme audio channel and a
bi-directional intercom channel.
Programme audio sound from an
external audio system can be fed to the
camera head. This can be mixed with
intercom sound; major intercom systems
(Four-wire/Two-wire/RTS/Clearcom) can
be interfaced via connectors on the rear
panel of the CCU-TX7P. The camera
control unit accepts two-channel input
from the external intercom system, and
communication can be initiated from the
CCU-TX7P, or the camera adaptor
(CA-TX7P) or the external intercom
system (CH-1 or CH-2).
Programme Microphone System
The CCU-TX7P and CA-TX7P are
equipped with a two-channel microphone
system. Two XLR connectors on the
CA-TX7P provide balanced audio CH-1
and CH-2 inputs with microphone
phantom power available for an external
microphone. The MIC input gain of each
channel can be controlled within a range
of ±12dB in 16 steps by control volumes
on the internal board of the CCU-TX7P.
RS-232C Port
The CCU-TX7P is equipped with an
RS-232C port to link several CCU-TX7P
units for a multiple camera control
system, or to connect an external
personal computer.
Coaxial Control Capability
The CCU-TX7P is equipped with a
coaxial input. This enables each camera
to operate over conventional coaxial
cable instead of a triax cable, with power
supplied locally to the camera.
Compact Size
The CCU-TX7P is half a 19-inch rack
size wide and 4 units (4U) high. With the
Sony RMM-TXC7 Rack Mount Kit, two
CCU-TX7P units or one unit with a
waveform monitor can be mounted into a
standard 19-inch rack.
MAIN FEATURES
MAIN FEATURES
* For detailed information, please contact your
nearest Sony office.
DXBK-701 SDI Output Board