Sony CH180 Security Camera User Manual


 
Operating the Camera
Administrator and User
18
Operating the Camera
This section explains how to monitor the image from the
camera using your Web browser (Internet Explorer).
The functions of the camera should be set by the
Administrator. For the setting of the camera, see
“Administrating the Camera” on page 32.
Administrator and User
This network camera identifies those who log in as the
Administrator or User.
The Administrator can use all the functions of this
network camera, including camera settings. The User
can use the functions for monitoring the image and
audio from the camera, and control the camera. The
Viewer mode setting is used to restrict the user’s access
rights. There are five types of users.
Each type of user can use the corresponding functions below.
z Usable function
Not usable function
The access rights of the administrator and the user can
be set in “Setting the User — User Menu” of the
Administrator menu on page 68.
Function Administrator
User
Full Pan/Tilt Preset
position
Light View
Monitor a live image z zzzzz
View the date and time z zzzzz
Control the frame rate (JPEG mode only) zz––––
Control the image view size z zzzz
Save a still image and movie in the computer z zzzz
Send an image file to the FTP server zz––––
Send an image attached to an e-mail zz––––
Record an image in the memory zz––––
Control the alarm output of the I/O port on the camera zz––––
Switch the Day/Night function mode zz––––
Play an audio file (Voice alert) zz––––
Switch the TCP/UDP transmission mode (Available in
MPEG4/H.264 mode only)
zz––––
Call the preset position z zzz––
Perform the pan/tilt/zoom operation zzz–––
Receive audio z zzzzz
Select the codec mode z zzzz
Control the setting menu z –––––