Sony CLM-V55 Camera Accessories User Manual


 
19-GB
Note
When attaching to a camera that has an accessory shoe, read the
instruction manual of the camera too.
Notes
If using a camera equipped with a pop-up built-in flash, be careful of the
following:
Always close the built-in flash of the camera. If your camera has a built-in auto
flash function, turn that function off.
Before using the flash, remove this unit from the camera.
Make sure this unit is firmly fixed to the camera before use to prevent
this unit from falling during shooting.
5
Connect this unit to the camera with the HDMI cable
supplied.
Tip
If the cable is not long enough, use a Sony HDMI cable Type A-TypeC (not
supplied).
6
Turn on the power to the camera and this unit.
The viewfinder image of the camera is displayed on the LCD screen of this
unit. If your camera has an HDMI output setting function, set it to AUTO or
16:9.
continued