Sony CMA-H10 Camera Accessories User Manual


 
27
Power supply
The unit operates on either AC or 15V DC power supply.
AC power
Connect the AC power cord (supplied) to an AC outlet and
set the DC/AC SELECT switch on the rear panel to AC IN
(right). You can turn on and off the unit with the POWER
switch on the front panel.
DC power
Connect a 15V DC external power source to the DC 15V IN
connector and set the DC/AC SELECT switch on the rear
panel to DC 15V IN (left).
The power indicator lights when power is supplied to the
DC 15V IN connector. (The POWER switch on this unit
does not operate when using DC power.)
Mounting the unit in a rack
You can mount up to four CMA-H10 camera adaptors in a
19-inch rack using the RMM-1800 rack mount adaptor.
For more information on the RMM-1800, contact your Sony
dealer.