Filter
Top Products
70
Shooting menu For details on the operation 1 page 60
• For details on the white balance, see page 12.
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you
select [Fluorescent Light 1], [Fluorescent Light 2] or [Fluorescent Light 3].
• When shooting with a flash in other than [Flash] or [One Push]mode, [White Balance] is set to [Auto].
• You cannot select [Flash] when shooting movies.
To capture the basic white color in [One Push Set] mode
Memorizes the basic white color for the [One Push] mode. After selecting [One Push], do as
follows.
1 Frame a white object such as a piece of paper filling the screen under the same lighting
conditions as you will shoot the subject.
2 Press the MENU button.
3 Select [White Balance] with v/V on the control button, and [One Push Set] with b/B, then press
z.
4 The screen momentarily turns black, and when the white balance has been adjusted and stored in
the memory, the recording screen is displayed again.
n (Incandescent)
Adjusts for places under an incandescent lamp, or under
bright lighting, such as in a photo studio.
(Flash)
Adjusts for the flash conditions.
• You cannot select this item when shooting movies.
(One Push)
Adjusts the white balance depending on the light source. The
white color memorized in [One Push Set] mode becomes the
basic white color. Use this mode when [Auto] or other modes
cannot set the color properly.
(One Push Set)
Memorizes the basic white color which will be used in [One
Push] mode.
• This is unable to be selected while charging the flash.