Open as PDF
VISCA Camera-Issued Messages
ACK z0 4y FF
Completion z0 5y FF
Returned when the command is accepted.
Returned when the command has been executed.
z = Device address + 8
Syntax Error z0 60 02 FF
Command Buffer Full z0 60 03 FF
Command Canceled z0 6y 04 FF
No Socket z0 6y 05 FF
Command Not Executable z0 6y 41 FF
Returned when the command format is different or when a command with illegal
command parameters is accepted.
Indicates that two sockets are already being used (executing two commands) and the
command could not be accepted when received.
Returned when a command which is being executed in a socket specified by the
cancel command is canceled. The completion message for the command is not
Returned when no command is executed in a socket specified by the cancel
command, or when an invalid socket number is specified.
Returned when a command cannot be executed due to current conditions. For
example, when commands controlling the focus manually are received during auto
Command Message Comments
Network Change z0 38 FF Issued when power is being routed.
Network Change Message