Filter
Top Products
12
MSU-900 MSU-950
Four types of Sony Remote Control
Panel - the RCP-750, RCP-751, RCP-920,
and RCP-921 - are available, providing
a wide range of camera parame-
ter controls. The RCP-750/751 offers
in-depth menu-based controls, while
the RCP-920/ 921 allows direct and
quick control of various parameters
using dedicated buttons on the panel.
The RCP-750 and 751 are connected
to the CCU via dedicated cabling.
The RCP-920 and 921 can also be
connected and powered directly
from a (POE) network hub.
RCP-750 RCP-751 RCP-920 RCP-921
Camera Command Network Unit
The CNU-700 Camera Command Network
Unit allows communication between
all the units in the system, and provides
the ability to assign CCUs, MSUs, RCPs,
and HDC-1000 Series camera heads.
A RISC-based microprocessor system pro-
vides high-speed transfer of command
signals to the HDCU-1000/HDCU-1500 Ca-
mera Control Unit for rapid response and
reliable control.
One CNU-700 unit can control six came-
ras, but can be expanded to control up to
12 cameras when fitted with an optional
BKP-7930 Expansion Board.
Several CNU-700 units can be connec-
ted to the camera control network in
a large system. The CNU-700 supports
RCP assignment.
HDC-1400/HDC-1500
Versatile System Components
The MSU-900/950 Master Setup Unit is
a central control panel used for the
adjustment of camera parameters
in a multi-camera system. The MSU-
900/950 unit is connected to each
camera control unit in the system via
the CNU-700 Command Network Unit
or an Ethernet network hub.
> Central control of camera parameters for the entire camera system
(up to 24 cameras)
> Picture and waveform monitor switching
> Precise picture adjustment
> Built-in 6.5-inch
1
type LCD display for clear viewing of adjustment
parameters during operation
> Memory Stick slot for storing/recalling files
> Built-in Ethernet interface (10Base-T/100Base-TX)
1 Viewable area measured diagonally
MSU-900/950
RCP Series
CNU-700
Remote Control Panel
Master Setup Unit