Sony HDC-1500 Security Camera User Manual


 
19
HDCU-1000/1500 Specifications
HDCU-1000 HDCU-1500
General
Power supply 100 V or 120 V or 220 to 240 V AC, 50/60 Hz 100 to 240 V AC, 50/60 Hz
Operating temperature +5 °C to +40 °C (+41 °F to +104 °F) -10 °C to +40 °C (+14 °F to +104 °F)
Storage temperature -20 °C to +60 °C (-4 °F to +140 °F)
Mass 14.8 kg (32 lb 10 oz) 6.5 kg (14 lb 5 oz)
Input/output connectors
Camera
Optical fiber connector (1), 1.485/1.4835 Gb/s Serial Digital x2,
240 V AC power supply
Optical fiber connector (1), 1.485/1.4835 Gb/s Serial Digital x2,
180 V AC power supply
Intercom/Tally/PGM
D-sub 25-pin (1)
INCOM (PD/ENG): 4W/RTS/CC, 0 dB
PGM: 2 systems, 0/-20 dB
PGM: 2 systems, 0/-20 dB
RCP/CNU 8-pin (1)
Trunk A 12-pin (1)
Trunk line D-sub 9-pin (female) (1), RS-232C/422
Ethernet RJ-45 (1), 10Base-T/100Base-TX
I/O port D-sub 15-pin (female) (1)
Input connectors
AC input (1), 100, 110 to 120, 220 to 240 V AC (1), 100 to 240 V AC
Return input
BNC type (4), HD-SDI: SMPTE 292M, 1.485/1.4835 Gb/s
BNC type (4), SD-SDI: SMPTE 259M, 270 Mb/s
BNC type (3), HD-SDI/SD-SDI/VBS selectable
VBS: 1.0 Vp-p, 75 Ω
HD-SDI: SMPTE 292M, 1.485/1.4835 Gb/s
SD-SDI: SMPTE 259M, 270 Mb/s
Reference input
BNC type (2), loop-through output
HD: SMPTE-274M, tri-level sync, 0.6 Vp-p, 75 Ω
SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/PAL: 0.3 Vp-p, 75 Ω) or NTSC 10F-BB
Prompter imput BNC type (4), loop-through output, analogue signal, 1.0 Vp-p, 75 Ω
Mic remote D-sub 15-pin (1)
Output connectors
Mic output XLR-3-pin (male) (2), 0/-20 dBs
AES/EBU BNC type (1)
Character output BNC type (1), VBS, 1.0 Vp-p, 75 Ω, character ON/OFF selectable
Character/Sync output
BNC type (1), HD sync/SD sync/Character selectable
HD sync: BTA S001A, tri-level sync, 0.6 Vp-p, 75 Ω
SD sync: composite sync, 0.3 Vp-p, 75 Ω
Character: VBS, 1.0 Vp-p, 75 Ω, character ON/OFF selectable
WF remote D-sub 15-pin (female) (1)
HD-SDI/SD-SDI output
BNC type (4), HD-SDI/SD-SDI selectable
HD-SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
BNC type (2), HD-SDI/SD-SDI selectable
HD-SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
HD-SDI/SD-SDI monitor output
BNC type (4), HD-SDI/SD-SDI, and character ON/OFF selectable
HD-SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
BNC type (1), HD-SDI/SD-SDI, and character ON/OFF selectable
HD-SDI: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
SD-SDI: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
Sync out
BNC type (1), HD sync/SD sync selectable
HD: BTA S001A, tri-level sync, 0.6 Vp-p, 75 Ω
SD: composite sync, 0.3 Vp-p, 75 Ω
WF mode 4-pin (2)
Optional input/output boards
HKCU-1001 SD Analogue Interface Unit
VBS output BNC type (2)
Analogue composite monitor output BNC type: WF (1), PIX (1)
HKCU-1003 Multi Interface Unit
VDA-A board: VBS I/F
VBS output
BNC type (2)
Analogue composite monitor output BNC type: WF (1), PIX (1)
VDA-B board: VBS I/F
Frame reference input/output
BNC type (1, loop-through), full pull-down sequence lock
Analogue composite monitor output
BNC type: WF (1), PIX (1)
VDA-C board: Sub I/F
VBS output
BNC type (1)
Analogue component output BNC type (3), R/G/B or Y/R-Y/B-Y selectable
HKCU-1005 HD/SD Expansion Unit
HD SDI/SD SDI output BNC type (2)
HD SDI/SD SDI monitor output BNC type (2), charactor on/off selectable
HKC-T1500 Specifications
General
Power requirements for Camera input 13.5 to 17.0 V DC
Operating temperature -20 ˚C to +45 ˚C (-4 ˚F to +113 ˚F)
Operating humidity 10% to 90% (no condensation)
Mass
Cable adapter: approx. 0.5 kg (1 lb 2 oz)
CCD block adapter: approx. 1.9 kg (4 lb 3 oz) (with CCD block)
CCD block adaptor I/F
Camera cable 55-pin multicore cable connector (male)
MIC IN XLR-3-pin (female) (1)
LENS 12-pin (1)
VF
20-pin (1)
Intercom XLR-5-pin (female) (1)
Cable adaptor I/F
Camera cable 55-pin multicore cable connector (female)
MIC OUT XLR-3-pin (male) (1)
VF 20-pin (1)
INCOM XLR-5-pin (male) (1)