Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording4-24
Selecting the automatic iris window
1 Follow the procedure of steps 1 and 2 described in “Changing the
reference value” on page 4-20 to display the AUTO IRIS page.
2 Turn the MENU knob to move the t mark to IRIS WINDOW
IND.
The t mark at the left of the selected item changes to the z mark
and the z mark at the left of the setting changes to the ? mark.
3 Turn the MENU knob until ON appears, then push the MENU knob.
The z mark at the left of the selected item changes to the t mark
and the ? mark at the left of the setting changes to the z mark. The
setting is executed.
The currently selected auto iris window appears on the viewfinder
screen.
If it is not necessary to display the auto iris window on the
viewfinder, set to OFF.
4 Turn the MENU knob to move the t mark to IRIS WINDOW.
The t mark at the left of the selected item changes to the z mark
and the z mark at the left of the setting changes to the ? mark.