Filter
Top Products
4
Chapter 4 Adjustments and Settings for Recording 4-71
VF DISP 2 page
Item Contents
DISP ZOOM Zoom position indicator
DISP COLOR TEMP Displays the color temperature
DISP VOLT
a)
Displays the battery voltage of the DC IN
connector.
DISP WRR RF LVL Displays the reception level of the wireless
microphone.
DISP TIME CODE Displays the time code
a) When an Anton Bauer Intelligent Battery System is used, the remaining
battery capacity of the Anton Bauer Intelligent Battery is displayed
numerically regardless of this setting.
3 Turn the MENU knob to move the t mark to the item you want to
set, and push the MENU knob.
The t mark at the left of the selected item changes to the z mark
and the z mark at the left of the setting changes to the ? mark.
4 Turn the MENU knob whether the selected item should appear in
the viewfinder display (the “ON” setting), or not appear (the “OFF”
setting), and push the MENU knob.
The z mark at the left of the selected item changes to the t mark
and the ? mark at the left of the setting changes to the z mark.
Note that pushing the MENU CANCEL/PRST / ESCAPE switch to
CANCEL/PRST on this page has no effect.
5 To turn the setting of another item ON or OFF, repeat steps 3 and 4.
6 To end menu operations, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen (when the viewfinder
DISPLAY switch is set to ON or the VF DISP item is set to ON on
the VF DISP 1 page).