Filter
Top Products
2
Chapter 2 Locations and Functions of Parts and Controls2-30
2 MENU knob
Use this knob to change the page selection or a setting within the menu.
Push: If you push this knob when the arrow (t) is placed at the page
title on the menu, the arrow (t) changes to the question mark (?)
and you can change the page.
When the arrow mark is placed at the position other than the page
title, the camcorder turns in mode where you can change the settings
by pushing this knob.
Turn: Turn this knob to change the page or change the settings of the
items.
3 STATUS ON/SEL / OFF (menu display on/paging/display off)
switch
To enable this switch, set the MENU ON/OFF switch to OFF.
Closing the cover automatically sets the MENU ON/OFF switch to OFF.
ON/SEL: Each time this switch is pushed upward, the window to
confirm the menu settings and conditions of the camcorder is
displayed on the viewfinder screen. There are three windows, which
are switched each time the switch is pushed upward. Each window is
displayed for about 10 seconds.
OFF: To clear the page immediately after display, push this switch down
to the OFF position.
You can select the confirmation window to be displayed on the
menu.
For details, see “Display/don’t display status confirmation windows” on page 4-
91.