Filter
Top Products
3
Chapter 3 Recording and Playback3-18
8 Set the marker(s) to be recorded to ON.
1 Turn the MENU knob to move the t mark to the marker to be
set.
2 Turn the MENU knob clockwise or counter clockwise until the
desired setting appears.
To record the marker to the tape, select ON.
To not record the marker, select OFF.
3 Perform settings of the remaining markers repeating steps 1 and
2.
9 Set the MENU ON/OFF switch to OFF to end the menu operation.
Recording a shot marker 1
Press the RET button once. On the viewfinder screen, “z” and the time
code of the marked point are displayed for about 3 seconds.
Recording a shot marker 2
Press the RET button twice. On the viewfinder screen, “X” and the time
code of the marked point are displayed for about 3 seconds.