Filter
Top Products
Chapter 1 Overview
1-6 Chapter 1 Overview
Locations and Functions of Parts
6 CONTROL-S (S control input) connector
(stereo mini jack)
By connecting a controller, such as the SVRM-100A,
equipped with an S control output to this connector,
tape transport on this recorder can be remotely
controlled.
1 Tape transport control block
1 LOCK key and indicator
Press this key to turn on/off the key-lock function
(provided to prevent misoperation).
The LED indicator (red) lights when the function is on.
When this indicator is lit, other keys are disabled. To
release the lock, press the LOCK key again.
A four-digit password to release the lock can be
specified by using the Function Control menu.
For details, see “Setting Passwords” on page 5-16.
2 REW 0 (rewind) key and indicator
Press this key to rewind the tape. The LED indicator
(green) lights.
This key functions as the reverse search key during
playback.
3 PLAY ( key and indicator
Press this key to start playback. The LED indicator
(green) lights.
On the HSR-2/2P, this key also functions as the PRE
REVERSE PLAY key. When this key is pressed
during recording, playback is performed without
stopping recording.
For details, see “Playback During Recording” on page 2-12.
4 F FWD ) (fast forward) key and indicator
Press this key to fast-forward the tape. The LED
indicator (green) lights.
This key functions as the forward search key during
playback.
5 REC r (record) key
Press this key to start recording.
6 FRAME ' key
Press this key to reverse the picture by one frame.
7 STOP p key
When you press this key during playback, playback
ends. When you press this key during recording, a
message to confirm that you want recording to stop is
displayed.
With the HSR-2/2P, guidance for the next operation is
displayed when you press this key in Playback During
Recording mode.
8 FRAME 7 key
Press this key to advance the picture by one frame.
2 Menu operation block
1 MENU key
Press this key to enter Menu mode. Press again to exit
the mode.
2 CURSOR B/b keys
Used to move from one layer to another in Menu
mode.
While monitoring a picture, you can switch pages
(different camera configuration with the same screen
divisions) with these keys.
FRAME STOPFRAMEREC
F FWDPLAYREW
‚·º
¶π®æ
LOCK
1LOCK key and indicator
2REW 0 key and indicator
3PLAY ( key and indicator
4F FWD ) key and
indicator
5REC r key
6FRAME ' key
7STOP p key
8FRAME 7 key
CURSOR
MENU
SET/YES
RESET/NO
◊
√
ı ∫
5RESET/NO key
1MENU key
2CURSOR B/b keys
3CURSOR V/v keys
4SET/YES key