Filter
Top Products
Chapter 5 Connections and Preparations
Chapter 5 Connections and Preparations 5-9
5 When the settings are completed, press the SET
key.
A message “NOW SAVING” is displayed, and the
settings are stored in nonvolatile memory.
The Indication Control menu is restored.
To restore to the previous setting
Before pressing the SET key, press the MENU key.
The message “ABORT !” is displayed, and the
previous setting is restored.
Setting the Display Structures
Assign the cameras to the divisions of each divided
screen for monitoring and playback. These display
structures can be independently set for monitoring and
playback.
In display structures for playback, you can assign not
only playback cameras but also monitoring cameras.
In the division to which a monitoring camera has been
assigned, you can see the current picture from the
camera even while playback is in progress in other
divisions.
To set the monitor display structures
Use MONI DISP STRUCTURE (Moni Disp) of the
Image Control menu for making the setting.
Note
When the settings on CAMERA CONNECTION
(page 5-7) are changed, the settings of the display
structures may be automatically changed according to
the CAMERA CONNECTION settings.
1 Highlight IMAGE CONTROL MENU (Image
Menu) of the top menu by pressing the V or v key,
then press the b key.
The Image Control Menu (page 4-6) is displayed.
2 Highlight MONI DISP STRUCTURE (Moni Disp)
by pressing the V or v key, then press the b key.
The menu shifts to monitor display structure
setting.
SETUP MENU
IMAGE CONTROL MENU
MONI DISP STRUCTURE
4 DIVISION
6 DIVISION
7 DIVISION
8 DIVISION
9 DIVISION
10 DIVISION
13 DIVISION
16 DIVISION
3 Highlight the desired division mode by pressing
the V or v key, then press the b key.
The setting display of the selected division mode
appears on the monitor screen.
Example: 8-Division mode
CAM 2
CAM 1
1 page
CAM 3
CAM 4
CAM 5 CAM 6 CAM 7
(MON)
(MON)
(MON)
(MON)
(MON) (MON) (MON)
NO
4 Select the division to be set by pressing the b or B
key.
Each time you press either of the keys, the next
division is selected, and the indication for the
selected division flash.
5 Select the camera to be monitored in the selected
division by pressing the V or v key.
Each time you press either keys, the camera
numbers of the connected cameras and NO are
cyclically selected.
You can specify the camera number by pressing
the corresponding number key. Note, however,
that the keys of non-connected camera numbers are
disabled.
(Continued)