Sony HSR-1P Security Camera User Manual


 
Chapter 4 Menu Operations
4-6 Chapter 4 Menu Operations
Image Control Menu
Monitor screen
SETUP MENU
IMAGE CONTROL MENU
A IMAGE
B IMAGE
CAMERA CONNECTION
MONI DISP STRUCTURE
PLAY DISP STRUCTURE
The items marked with are enhanced items, which are
displayed only when MENU GRADE is set to ENH on the
top menu.
Character display
Image Menu
Press the b key.
>A Image
The Image Control menu item selected when you left
the menu the last time is displayed.
The setting shown in bold characters in the Layer 3 or
Layer 4 column of the table is the standard setting and is
displayed with an asterisk on the monitor screen.
Display Char. display Contents
Layer 2 Layer 3 Layer 4
A IMAGE >A Image Selects the items regarding the video output from the VIDEO
OUT A connector.
MONITOR >>Monitor Selects the output method in monitoring.
MANUAL >>>Manual Selects the camera input to be monitored with the camera
number key.
AUTO >>>Auto Cyclically switches the camera input to be monitored.
ALARM CHANGE >>Alm Chang Determines whether the picture for monitoring to be switched
upon an alarm input.
OFF >>>OFF Does not switch the picture upon alarm input.
ON >>>ON Switches the picture to that from the camera for which an alarm
is input.
AUTO CYCLE >>AutoCycle Enters the setting mode for the cycle of automatic monitor
switching. n = 1 to 60
n SEC (5) n sec
For the setting procedure, see “Setting the Automatic
Change Cycle” on page 5-11.
B IMAGE >B Image Selects the items regarding the video output from the VIDEO
OUT B connector.
IMAGE >>Image Selects the picture to be output.
A IMAGE >>>A Image Outputs the same video signal as that from the VIDEO A
connector.
AUTO >>>Auto Outputs pictures from cameras by cyclically switching the
cameras.
Camera n >>>Camera n Steadily outputs the picture from the specific camera.
n = camera number 1 to 16
ALARM CHANGE >>Alm Chang Determines whether the picture for monitoring to be switched
upon an alarm input.
OFF >>>OFF Does not switch the picture upon an alarm input.
ON >>>ON Switches to the picture from the camera for which an alarm is
input.
AUTO CYCLE >>AutoCycle Enters the setting mode for the cycle of automatic monitor
switching. n = 1 to 60
n SEC (5) n sec
For the setting procedure, see “Setting the Automatic
Change Cycle” on page 5-11.
Menu Items