Sony HSR-2 Security Camera User Manual


 
Chapter 3 Convenient Recording/Playback Functions
3-10 Chapter 3 Convenient Recording/Playback Functions
2 Press the ALARM SEARCH key.
3 Using the V or v key, specify the sequential
number (in order from the current tape position) of
the desired alarm recording.
The + mark specifies that the order is in the
forward direction and the – mark in the reverse
direction.
The valid range is from +99 to –99.
4 Press the SET key.
The tape runs in rewind or fast-forward mode to
locate the tape position specified in step 3.
When the specified position is located, the image
at that position is reproduced in Still mode.
To cancel an alarm search
• If you have not yet pressed the SET key, press the
ALARM SEARCH key again.
• If the tape is being searched, press the STOP key.
Alarm Search