Sony HSR-2 Security Camera User Manual


 
Chapter 4 Menu Operations
Chapter 4 Menu Operations 4-9
Display Char. display Contents
Layer 2 Layer 3 Layer 4
MONI CHAR POS >MoniChrPos Selects the position of character display on the screen.
UP >>Up Displays information, such as date/time and operating status of
the recorder, on the upper of the screen.
DOWN >>Down To be selected if the upper display area is lost owing to the
monitor’s characteristics.
MONI CHAR INFO >MonChrInfo Selects the character data to be displayed on the screen.
CAMERA NAMES >>Cam Name Determines whether to display the camera names.
DISPLAY >>>Display
NO >>>No Disp
DATE >>Date Info Determines whether to display the date.
DISPLAY >>>Display
NO >>>No Disp
TIME >>Time Info Determines whether to display the time.
DISPLAY >>>Display
NO >>>No Disp
REC MODE >>Rec Mode Determines whether to display the recording mode.
DISPLAY >>>Display
NO >>>No Disp
TIME MODE >>Time Mode Determines whether to display the time mode.
DISPLAY >>>Display
NO >>>No Disp
QUALITY MODE >>Quality Determines whether to display the quality mode.
DISPLAY >>>Display
NO >>>No Disp
REC CYCLE >>RecCycle Determines whether to display the recording cycle.
DISPLAY >>>Display
NO >>>No Disp
REC CHAR POSI >RecChrPos Determines the position to superimpose the recorded characters.
UP LEFT >>Up Left
UP RIGHT >>Up Right
LOW LEFT >>Low Left
LOW RIGHT >>Low Right
REC CHAR INFO >RecChrInfo Selects the character data to be recorded.
CAMERA NO. >>Camera No. Determines whether to record the camera number to be
DISPLAY >>>Display
superomposed at the lower right.
NO >>>No Disp
DATE >>Date Info Determines whether to record the date.
DISPLAY >>>Display
NO >>>No Disp
TIME >>Time Info Determines whether to record the time.
DISPLAY >>>Display
NO >>>No Disp
CAMERA NAME >CameraName Enters the mode to set the camera names.
For the setting procedure, see “Setting Camera Names” on
page 5-8.