Sony HSR-X200 Security Camera User Manual


 
59 (GB)
Checking the Information on
Power Failure and Usage Times
POWER FAILURE /USED TIME of MAIN MENU 2
permits you to know whether interruption of recording
owing to a power failure.
You can also check the accumulated usage time(s) of
the built-in hard disk(s), the powered time of the
recorder, and the firmware version of the recorder.
1 Press the MENU button to display MAIN MENU 1
and press the MENU button again to switch to
MAIN MENU 2.
2 Select 7. POWER FAILURE /USED TIME.
The POWER FAILURE /USED TIME display
appears.
<POWER FAILURE/USED TIME>
POWER FAILURE
#002 FAILURE 02-12 07:22
RECOVER 02-15 10:20
USED TIME
DISK 1 USE : 00003H
DISK 2 USE : -----H
POWER : 00358H
FIRMWARE : VER 1.00
POWER FAILURE
The occurrence time and the recovery time of the latest
power failure are displayed.
USED TIME
The accumulated usage time(s) of the built-in hard
disk(s) and the recorder are displayed.
FIRMWARE
The firmware version of the recorder is displayed.
To exit this menu, press the EXIT/OSD button.
Servicing Periodically
To maintain optimum operating conditions and picture
quality, periodic servicing (cleaning, lubrication, parts
replacement) is necessary.
Consult your Sony dealer.
If the recorder is to be used for critical monitoring
purposes, it may be preferable to perform servicing at
shorter intervals.