Filter
Top Products
11 (GB)
Front Panel
3 ALARM FULL indicator
Flashes in red if the remaining capacity of the alarm
recording area of the built-in hard disk drops below the
specified value (default: 1%).
4 FULL indicator
Flashes in red if the remaining capacity of the normal
recording area of the built-in hard disk drops below the
specified value (default: 1%).
5 LOCK indicator
Lights in red when the security lock function is active.
When you press an operation button with this indicator
lit, the indicator flashes, and a message is displayed to
prompt you to enter a password.
For details on the security lock and password, see “Security
Lock Settings” on page 49(GB).
Locations and Functions of Parts
1 POWER indicator
Lights in green when the power is applied to the unit
and goes dark when the power is disconnected.
It flashes in red if any problem occurs with the hard-
disk drive or fan.
Note
In order to keep the unit internal temperature low, a
fan is provided on the side of the unit. If the fan does
not operate properly, the POWER indicator will flash
to indicate a problem. Unplug the unit from the power
supply and check to make sure nothing is obstructing
the fan. If after the power is restored to the unit, the
POWER indicator still flashes, do not use the unit and
consult your dealer.
2 ALARM indicator
Lights in red during pre-alarm recording and flashes in
red during alarm recording. It goes dark when
recording ends.
For alarm recording and pre-alarm recording, see “Alarm
Recording” on page 24(GB).
POWER
ALARM
ALARM FULL
S PAUSE s STOP G PLAY
MENU EXIT/OSD
SHUTTLE
HOLD
ZOOM
CHANNEL COPY
PUSH
SEARCH
FRAME/FIELD
l
ALARM
L
-
LOCK
j
J
PRE REVERSE PLAY
a REC
TIMER
REC
STOP
DIGITAL SURVEILLANCE RECORDER HSR-X200
FULL
E
N
T
E
R
R
E
T
U
R
N
qjPC CARD slot
1POWER indicator
2ALARM indicator
3ALARM FULL indicator
4FULL indicator
5LOCK indicator
6Record/Playback buttons
7MENU button
8EXIT/OSD button
9SHUTTLE HOLD button and indicator
0Shuttle dial
qaJog dial
qsZOOM button and indicator
qdCHANNEL button and indicator
qfSEARCH FRAME/FIELD button
qgCOPY button and indicator
qhMenu reset button