Filter
Top Products
46 (GB)
Preparations
2: When adjusting the time by using the clock of
the first unit as the master
Recording Area Settings
Of the built-in hard disk, 80% is assigned to the
normal recording area, 19% to the alarm recording
area, and 1% to the archive area as the defaults.
You may change this assignment and reset the areas
with a menu operation.
For the normal recording and alarm recording areas,
you can also set whether to overwrite the data or stop
recording when the area becomes full.
Changing the size of an area
You can change the percentages of areas using
RECORDING AREA SET of MAIN MENU 1.
Note
When you change the area assignment, the previous
data will be lost.
1 Press the MENU button to display MAIN
MENU 1.
2 Select 3. RECORDING AREA SET.
The RECORDING AREA SET display appears,
showing the current settings.
<RECORDING AREA SET>
TOTAL CAPACITY : 80GB
NORMAL RECORDING AREA : 80%
AREA FULL RESET c
ALARM RECODING AREA : 19%
AREA FULL RESET c
ARCHIVE AREA : 1%
AREA FULL RESET c
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
3 Turn the Jog dial to highlight the area to be
changed, and turn the Shuttle dial clockwise to
finalize your selection.
The current value of the selected area flashes.
4 Turn the Jog dial to select the desired value and
turn the Shuttle dial clockwise to register the
setting.
You may set the normal recording area and the
alarm recording area independently.
CLOCK
IN
CLOCK
OUT
COM
CLOCK
INCOM
COM
CLOCK
OUT
COM
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
RS-232C
IN INOUT OUT
WARNING OUT
CLOCK
NON REC OUT
ALARM
RESET
FULL
ALARM
FULL
ON
RS485
TERMINATE
OFF
-AC IN
COMCOM
AB
INOUTCOM COMCOMCOM COM
REMOTE
RS485
SERIES
SW OUT
HSR-X200/X200P
(Master unit)
HSR-X200/X200P
HSR-X200/X200P