Filter
Top Products
1. MENU → (Setup) → [PAL/NTSC Selector] → [Enter]
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with 1080
60i-compatible devices. The 1080 50i-compatible devices have a “50i” mark on the bottom of
the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the “Running on NTSC.” message always appears on the
start-up screen each time you turn the product on.
[122] How to Use
Changing settings Setup menu
Demo Mode
The [Demo Mode] function displays the movies recorded on the memory card automatically
(demonstration), when the camera has not been operated for a certain time.
Normally select [Off].
1. MENU → (Setup) → [Demo Mode] → desired setting.
Menu item details
On:
The movie playback demonstration starts automatically if the product is not operated for about
one minute. Only protected AVCHD movies are played back.
Set the view mode to [AVCHD View], and protect the movie file with the oldest recorded date
and time.
Off (default setting):
Does not show the demonstration.
Note
You can set this item only when the product is powered by the AC-UD10/AC-UD11 AC
Adaptor (sold separately).
Even if [On] is selected, the product does not start a demonstration if there is no movie file on
the memory card.
When [On] is selected, the product does not switch to power save mode.