Filter
Top Products
[273] Troubleshooting Troubleshooting Shooting still images/movies
The corners of the picture are too dark.
If any filter or hood is used, take it off and try shooting again. Depending on the thickness of
the filter and improper attachment of the hood, the filter or the hood may partially appear in
the image. The optical properties of some lenses may cause the periphery of the image to
appear too dark (insufficient light). You may compensate for this phenomenon with [Shading
Comp.].
[274] Troubleshooting Troubleshooting Shooting still images/movies
The image is blurred.
Activate the SteadyShot function by pressing the shutter button halfway down and then shoot
images.
The picture was taken in a dark location without the flash, resulting in product-shake. The
use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in
[Scene Selection] are also effective in reducing blur.
[275] Troubleshooting Troubleshooting Shooting still images/movies
The LCD screen darkens after a short period of time
passed.
If you do not operate the product for a certain period of time, the product switches to the
power-save mode. The product exits power-save mode when you perform operations such
as pressing the shutter button halfway.
[276] Troubleshooting Troubleshooting Shooting still images/movies
The flash takes too long to recharge.
The flash has been fired in succession in a short period. When the flash has been fired in