Filter
Top Products
1-14 (E)
HDC-900/950 IMM
1-2-3. Connection Connectors/Cables
Connection made with the connector panels during instal-
lation or service, should be made with the connectors/
complete cable assemblies specified in the following list,
or equivalent parts.
Indication Connection connector/cable
TEST OUT 1-569-370-12 Plug, BNC
PROMPTER
SERIAL OUT
VIDEO OUT
(BNC)
AUDIO IN 1-508-084-00 XLR, 3P Male or
MIC IN ITT Cannon XLR-3-12C equivalent
(3P FEMALE) Cable assembly
(supplied with HKC-T950, 0.8 m)
1-823-599-11
*3
MIC IN 1-508-083-00 XLR, 3P, Female or
(3P MALE) ITT Cannon XLR-3-11C equivalent
Cable assembly
(supplied with HKC-T950, 0.8 m)
1-823-599-11
*3
RET CONTROL 1-560-078-00 Plug, 6P Male or
(6P FEMALE) HIROSE HR10-7PA-6P equivalent
DC OUT 1-566-425-11 Plug, 4P Male or
(4P FEMALE) HIROSE HR10A-7P-4P equivalent
INTERCOM 1-508-370-11 XLR, 5P Male or
INCOM ITT Cannon XLR-5-12C equivalent
(5P FEMALE) Cable assembly
(supplied with HKC-T950, 0.8 m)
1-823-600-11
*3
INCOM 1-508-363-00 XLR, 5P Female or
(5P MALE) ITT Cannon XLR-5-11C equivalent
Cable assembly
(supplied with HKC-T950, 0.8 m)
1-823-600-11
*3
VTR 1-564-184-00 Plug, 26P Female or
CAM BODY Cable assembly
*3
HDCZ-A10
(supplied with HKC-T950, 10 m)
1-823-615-11
HDCZ-A25 (option, 25 m)
1-823-616-11
HDCZ-A50 (option, 50 m)
1-823-617-11
OPT HEAD 1-564-183-31 Plug, 26P Male or
(26P FEMALE) Cable assembly
*3
HDCZ-A10
(supplied with HKC-T950, 10 m)
1-823-615-11
HDCZ-A25 (option, 25 m)
1-823-616-11
HDCZ-A50 (option, 50 m)
1-823-617-11
DC IN 1-508-362-00 XLR, 4P Female or
(4P MALE) ITT Cannon XLR-4-11C equivalent, or
Cable assembly 1-551-577-00
(Supplied with AC-550/550CE)
1-2. Connectors and Cables
Indication Connection connector/cable
REMOTE 1-766-848-11 Plug, 8P Male or
(8P FEMALE) CCA-5 cable assembly (option)
*2
CCA-5-10 (10 m) /CCA-5-3 (3 m)
or
REMOTE cable 1-783-372-11
(supplied with RM-B150, 10 m)
*1 *2
TRACKER HIROSE HR25-9P-20P equivalent
(20P FEMALE)
VF Cable assembly
(20P FEMALE) (supplied with HKC-T950, 0.7 m)
1-792-603-21
*1: Use of REMOTE cable enables to monitor video signals.
*2: If using a cable of length different from a standard product, contact your
local Sony Sales Office/Service Center.
*3: Only for HKC-T950.
1-2-4. Note in connecting CCU connector
It is recommendable to clean the optical contact portions
mentioned below before connecting this unit to the camera
control unit.
. CCU connector of this unit
. Camera connector of the camera control unit
. Optical/Electrical cable
It is also necessary to clean the optical contact portions
mentioned below before using the HDC-950/930 to the
large lens adaptor CA-905L.
. CA cable of a large lens adaptor
. CCU connector of a large lens adaptor
For details on a cleaning method, refer to Section 2-1
“Cleaning of Connector/Cable”.