Filter
Top Products
1-18 (E)
HDC-900/950 IMM
1-4. Opening/Closing the Side Panel
HDC-900/910
1. Unscrew the two lock screws of the side panel.
2. While sliding the safety lock toward the lens, open the
side panel by holding the handle.
3. Close the side panel and tighten securely the lock
screws of the side panel.
[Reference][Reference]
[Reference][Reference]
[Reference]
Closing the side panel brings the safety lock to an
automatic locking.
HDC-950/930
1. Unscrew the eight screws as shown in the figure, then
remove the inside panel and outside panel.
2. Reinstall in the reverse order of removal step 1.
Lock screw of the
side panel
Safety lock
Handle
Inside panel
Screws
Outside panel
Screws
1-4. Opening/Closing the Side Panel