Sony L Camcorder User Manual


 
3-22 (E)
HDC-900/950 IMM
<SDI>
PROMPTER : OFF
BNC SDI OUT: OFF
<OUT PUT>
PROMPTER : OFF
BNC SDI OUT: OFF
LINER EXP : OFF
(Display is initial values.)
ROM Version lower than 1.30 ROM Version 1.30 or higher
MULTI FORMAT page
Item Setting Description
CURRENT Displays the format being currently selected.
The currently selected format is highlighted in the line below.
NEXT
a)
Selects the format when the power is turned on next time.
HDC-900/910 :
A turn of the MENU SELECT control shifts the portion highlighted.
Press the MENU SELECT switch toward the ENTER side for determi-
nation. (The highlighted portion does not shift to the *** portion.)
HDC-950/930 :
A turn of the rotary encoder shifts the portion highlighted. Press the
rotary encoder for determination. (The highlighted portion does not shift
to the *** portion.)
a) This setting is valid only when the camera is used alone. When the camera control unit is connected, the camera control unit setting
takes a priority.
SDI page (Displays ROM Version lower than 1.30)
OUT PUT page (Displays ROM Version 1.30 or higher)
Item Setting Description
PROMPTER
a)
ON, OFF ON : Prompter signal is output at PROMPTER OUT connector
OFF : No prompter signal is output
BNC SDI OUT
b)
ON, OFF ON : SDI signal is output at HD SERIAL DIGITAL OUT connector
OFF : No SDI signal is output
LINER EXP
c)
ON, OFF ON : Improves the reproducibility of high-luminance part in PsF
format.
OFF : Standard setting.
a) This setting is valid only when the camera control unit is connected, yet in the camera is used alone, setting is disabled. (“—” is
displayed.)
b) This setting is valid only when the camera is used alone. When the camera control unit is connected, setting is always ON. (“—” is
displayed.)
c) This can be selected when the VA-223 board is installed.
3-5. MAINTENANCE Menu
(Display is initial values.)
<MULTI FORMAT>
CURRENT 59.94I
NEXT : 59.94I
60I 50I
59.94I
30PsF 25PsF 24PsF
29.97PsF 23.98PsF
<MULTI FORMAT>
CURRENT 59.94I
NEXT : 59.94I
60I 50I
59.94I
HDC-900/950 HDC-910/930